NordVPN Help Center
One place for all the information you need

How to disable IPv6 on Linux

Updated

More details about IPv6 here: https://support.nordvpn.com/hc/en-us/articles/115000087325

Red Hat based distributions

Here's how to disable the protocol on a Red Hat-based system:

  1. Open a terminal window.
  2. Change to the root user.
  3. Issue the command sysctl -w net.ipv6.conf.all.disable_ipv6=1
  4. Issue the command sysctl -w net.ipv6.conf.default.disable_ipv6=1
  5. Issue the command sysctl -w net.ipv6.conf.tun0.disable_ipv6=1

To re-enable IPv6, issue the following commands:

sysctl -w net.ipv6.conf.all.disable_ipv6=0

sysctl -w net.ipv6.conf.default.disable_ipv6=0

sysctl -w net.ipv6.conf.tun0.disable_ipv6=0

Close ↑

Debian based distributions

Here's how to disable the protocol on a Debian-based machine.

1. Open a terminal window.

2. Issue the command sudo nano /etc/sysctl.conf

3. Add the following at the bottom of the file:

net.ipv6.conf.all.disable_ipv6 = 1

net.ipv6.conf.default.disable_ipv6 = 1

net.ipv6.conf.lo.disable_ipv6 = 1

net.ipv6.conf.tun0.disable_ipv6 = 1

4. Save and close the file.

5. Reboot the machine.

To re-enable IPv6, remove the above lines from /etc/sysctl.conf and reboot the machine.

Close ↑